When your automatic garage door suddenly stops working, there could be many reasons that can be repaired and fixed by hiring garage door repair services in Vista, CA.
Garage doors offer security to your vehicle and home. However, like other appliances and machines, garage door components also fail to operate. If your garage door is not working properly, it can be a frustrating start or end of your day. Here are some common automatic garage door issues and their solutions:
1. Dead Remote Batteries
The automatic garage door comes with a remote control to operate. Dead remote batteries can be a simple problem of improper working of your garage door. If batteries are dead, the remote cannot transfer signals to your door to open or close.
Here is the simplest way to check if there is a problem with your remote control or not. Use the remote on the wall inside the garage, if that remote will work efficiently, it means there is a problem with the remote control of your car. Changing remote batteries is quite simple, there is no technique or skill required.
2. Dirty Photo-Eye
Remember the old-time when you and your siblings ran underneath the garage door while it was closing. However, nowadays it is not possible due to tiny photo eyes that are installed on both sides of the garage door. These garage door eyes detect anything on the path of the garage door and prevent the automatic garage door from closing on anything, and causing any damage to the vehicle or worse causing any injury.
If you notice that your garage door is opening normally, but when you press the button for closing it, it doesn’t respond. In such a case check the photo eyes because they can get dirty over time and stop operating. Clean them delicately and try not to scratch on the lenses. That’s why gently clean the photo eyes with a clean cloth.
In case the door is still not working, check the alignment of the eyes. They should be pointing in the same place at the same angle, otherwise, they won’t work. Use a level to make sure both are facing the same direction at the same angle. After aligning them, check if the garage door is working or not. If not, call garage door opener services in Vista, CA, to diagnose the problem.
3. Broken Springs
If your remote is working and the motor is also getting power, but your garage door won’t go up, the reason can be broken springs. If you ever hear a loud noise from your garage, it is because the garage door is heavy and springs are broken due to heavy lifting.
If you notice broken springs, call professional garage door spring services in Vista, CA, as they can be difficult to handle by yourself. Don’t try to replace the spring yourself as it can be dangerous, and also avoid closing or opening the door until a professional arrives. Springs only come with a certain number of openings and closing and need replacement over time.
4. Out of Alignment Tracks
If tracks of your garage door are not aligned, the door will not function properly. If you notice gaps between the rollers or bending rails, it means tracks are not aligned, which can make it dangerous to operate your door.
To realign the garage door track, loosen the bolts that secure the track to the frame. Then, lightly hit the track with a rubber hammer to align it. After straight alignment, tight bolts securely. Repeat the same process on other tracks as well to align them.
If the door is not operating at all, it is not a problem that you should tackle. Hire professional garage door opener services to repair tracks in severe damage, they will replace the garage door tracks for your automatic gate to properly work.
5. Improper Limit Settings
Sometimes when you close your automatic garage door, you will notice that the garage door immediately goes back up after closing. This issue can arise in both brand new or old garage doors that need to be reset. This happens due to the limit settings of your garage door opener. The limit ranges send signals to the door opener, like how far the door should open before closing.
The garage door motor has dials that you can use to adjust the operating limit of the garage door. If you cannot find the settings or these settings are not working, call the garage door opener services in Vista, CA, to help get your garage door to stay closed and change limit settings.
These common automatic garage door problems can easily be solved with little DIY. If you cannot handle problems with your garage door, it is better to contact professionals.
