The Moosoo Vacuum Cleaner and the Eufy Robovac 11s are the Best Vacuum Cleaner for the cleanliness of the home. The Moosoo vacuum cleaner comes with the powerful suction mode with brushless mode with the stick. Moreover, the vacuum cleaner is equipped with a battery that you can charge alone and change along with the machine. But it is suggested to the users that they can charge the vacuum cleaner with the machine as they get to know about the charging with the help of the LED indicators. Always use Moosoo device accessories even for the replacement of any part.
The Eufy Robovac 11s can easily suck all the dust and dirt from the floors of the houses. It has 1200 Pa suction power that can even suck hard dust from the surfaces effortlessly. Moreover, it has large wheels that can roll over even on the carpets and clean all the mess. Before using it always ensure that it should be fully charged so you get a complete cleaning of your home with a single charge of the device.
Important Tips before the installation of the Best Vacuum Cleaner
Here are the important tips before the installation of the vacuum cleaner. In this article, you will get to know what precautions you need to take while or before installing the Moosoo vacuum cleaner or Eufy Robovac.
Tips for the Moosoo Vacuum Cleaner
For the Moosoo vacuum cleaner, you can use moosoo accessories. If the battery of the moosoo is drained out and you want to change it then it is recommended that you use only the moosoo battery. If you use another battery that can burst and can cause damage and injuries to the person. Before charging the battery of the moosoo vacuum cleaner always checks the voltage of the device. Use of another battery instead of a moosoo battery can be the reason for the fire in your house as it can explode if it does not fit with the vacuum cleaner.
Always ensure that you should not use the damaged plug or cable wire for the charging of the battery. In case the wire gets damaged then immediately change it to avoid any kind of mishap. Do not use the extension cable. Do not carry the power cord with the charger. It is recommended to the users that they should not use the cleaner on wet surfaces or handle it with wet hands.
Before using the vacuum cleaner, always read the user manual or check the signs of how to handle the damaged part and other necessary details. If you received a damaged or defective vacuum cleaner then do not use it. In that case, immediately replace it by contacting the vacuum cleaner service provider. Do not customize the parts of the vacuum cleaner as it increases the risk of personal injury. You can read the moosoo vacuum troubleshooting tips if you get any problem or issue with the device from the user manual.
Tips for the Eufy Robovac 11s Vacuum Cleaner with Installation
While cleaning the floor with the Eufy Robovac 11s remove the objects and power cords from the way of the vacuum cleaner as they can be tangled with the wires and create a problem for you. Always avoid cleaning the dark surface areas as it can malfunction the vacuum cleaner. Always keep the vacuum cleaner away from those places which can create a physical barrier for the device and get stuck in the lower space places. Make sure that the vacuum cleaner should do its work on dry surfaces not on wet areas. Away from the device from the stairs as it can climb the top of the objects easily. But it can damage the vacuum cleaner. Make a distance between the cleaner and those places where they can damage the device.
Installation of the Eufy Robovac 11s device
For the installation of the Eufy Robovac 11s vacuum device. Firstly, install the side brushes before using the vacuum cleaner. After that, turn off the power of the device with the help of a button. Now locate the charging base at the hard level not on the soft area so that it cannot collide with the wall. After that remove the object from the ways of the vacuum cleaner 4 feet from the left side and 5 feet from the right side of the device. At last, connect the connector with the power adapter and charge it by plugging it into the power cord. When it is connected the LED indicator blinks the white light.
To start the Eufy Robovac 11s cleaner press the button with the help of the remote control and set it into auto mode. If you want to stop the device then still you have to press the button of the vacuum device to stop the cleaning process. You can also schedule the time of cleaning the house. If you get any problem with the vacuum device then you can go through the Eufy Robovac 11s troubleshooting steps to get out of any issue.
Final Words
Here are the final words in which you will know which is the best vacuum cleaner for your home. You can read the article and check details about those devices and which one is suitable for the cleanliness of your house. Both are the best devices as they both have pros and cons. But they both can do a good job and you get your house clean with these vacuum cleaners.
