‌‌Accurate‌ ‌Flow‌ ‌Meter‌

A flow meter or a sensor is a device used to measure liquids or gases’ flow rate. They can measure linear, nonlinear, mass, and volume of fluids. Choosing the right flow meter for your application is essential. It will help you to calculate accurate flow rates and also reduce maintenance costs.

Always make sure to select a flow meter that will work properly. Avoid those flow meters that are cheap because they may be costly to install and maintain. Ensure that you do more research on each type of flow meter to get the right results. Also, consult the manufacturers. They know best and will lead you to a suitable meter. The following are some steps you should follow when selecting a flow meter for your industry.

Selecting an Accurate Flow Meter

When selecting the accurate flow meter, you should follow the following steps;

The Fluid Media Type

Selecting the right meter starts with understanding if you measure the liquid, gas, or steam. It is always great to know what kind of liquid you are measuring. Knowing this will help you choose the right flow meter for your industry.

A flow meter used to measure clean water will not be the best choice for dirty water. There flow meters for contaminated water and those for clean ones. Some flow meters are also used to measure fluids that are thicker than others. Also, make sure you consider the conductivity of the fluids as well.

When selecting a flow meter, you should look at the chemical properties of the fluid as well. Make sure you know whether the liquid is corrosive or not. Fluids that are corrosive may damage the meter because they can wear out. Make sure you use the right meter for the correct application. Doing this will help you to avoid unnecessary costs.

Understand the Operating Temperature and Pressure of the 

Fluid

Understanding the operating temperature and pressure of the fluid is essential. This is because some meters can be affected by the pressure and temperature of the liquid. If your flow meter’s accuracy is affected by the temperature of the fluid, always make sure you buy the one with a built-in temperature.

The Accuracy

Before you select a flow meter for your industry, make sure you understand the accuracy it needs. For you to get accurate measurements, you should always go for the best meter. Coriolis flow is the most popular meter when it comes to highly accurate measurements. These meters are expensive to buy, but they are very reliable.

Accuracy is essential when it comes to industries such as medicine, food, or biotech. These industries need precise accuracy, not just good.

Repeatability of the Flow Meter

When considering the meter’s accuracy, make sure you ask the seller the repeatability of the meter. Repeatability is the same as the consistency of accurate measurement. Because the meter is fixed to pipes flowing at a specific rate, the accuracy can also drop. Knowing the fluid’s repeatability is essential because it will help you compare accuracy in different meters.

Installation

Installation in measuring the flow of fluid is also essential when it comes to the selection of the right meter. Installing a meter will depend on the type of flow meter. Always ask for advice from the manufacturer on the installation process. Proper installation will save you some money. It will also help to get an accurate measurement.

Maintenance

When selecting a flow meter for your meter, always ask the seller what is needed to maintain it. Make sure you know how often you should check the meter and when to clean the meter. For meters such as orifice plates, replacing the moving part is good. It will help you reduce tear and wear and also helps to maintain accuracy.

The Life Cycle of the Meter

Before you select a meter for your industry, make sure you know your meter’s life cycle. In sectors such as gas and oil, the meter’s life cycle should be twenty-five years or more with no maintenance. In other applications, the life cycle is short. It is about one to two years. Make sure you choose the flow meter that fits your use.

Conclusion

Choosing a flow meter for your application can be challenging. Always make sure you ask your seller for the product information. Also, understand the maintenance of the meter so that you can avoid high costs. Your seller will be happy to answer all questions on the meter you want.

Author’s BIO:

Naman Modi is a Professional Blogger, SEO Expert & Guest blogger at proteusind.com, He is an Award-Winning Freelancer & Web Entrepreneur helping new entrepreneur’s launches their first successful online business.

By Anurag Rathod

Anurag Rathod is an Editor of Appclonescript.com, who is passionate for app-based startup solutions and on-demand business ideas. He believes in spreading tech trends. He is an avid reader and loves thinking out of the box to promote new technologies.