Tractor is a very important part of the agriculture sector and a great partner of farmers. Today, we had a great boost in the agriculture sector because of tractors. We know agriculture is ancient work done by hand, but the sector had touched successful heights when tractors invented. Also, the efficient tractors improve the agriculture sector’s conditions by providing high results. The technically advanced machine is a permanent supporter of farmers and farming.
Hence it becomes imperative that the tractor is fuel-efficient as the high fuel efficiency saves money and makes the tractor long-lasting. In the Indian tractor market, many efficient tractor models of various brands are available, including John Deere tractor, Mahindra tractor, etc. These tractors are powerful and excellent, so by following the below-mentioned method, you can make them long-lasting and keep strong as well.
Today, we show some tips or methods to increase a tractor’s fuel efficiency in this blog. So, if you want to make your tractor fuel-efficient, then keep the blog till the end.
Methods To Make Tractor’s Fuel Efficient
High fuel efficiency is an essential requirement for a tractor’s efficient performance. Also, fuel-efficient tractors save extra money for tractor users. However, many methods are available which help to improve tractor fuel efficiency and make it fuel-efficient. Top methods of reducing tractor’s fuel consumption are mentioned below, have a look.
Store Fuel Correctly
The first method is about the storage of fuel correctly. So, for this, you should paint above-ground fuel tanks with a light colour and keep them shaded to avoid the loss of fuel by evaporation.
Keep Maintain Engines and Tyres
The second tip is about the maintenance of engines and tyres. By the regular replacement of lubricants, air and fuel filters, you can reduce fuel usage, increasing horsepower. Tyre pressure depends upon the ground type, and it has the highest impact on fuel consumption. Over-inflated tyres would provide excessive slippage and because that tractor requires more engine power to make better transfer traction force on the ground and for lost grip.
On roads, an under-inflated tire would have a much larger contact surface area with the tarmac, thus creating considerable resistance that would also require more engine power. With proper pressure and alignment, you can decrease resistance, which helps improve fuel efficiency. And for all of this and information on the correct inflation pressure check the tractor’s manual.
Gear Up And Throttle Back
The third method is about gear up and throttles back. It is a fuel-saving method used to pull the load, which requires less than 70% of the tractor’s power. Therefore, to maintain the desired speed, you can save fuel by shifting to a higher gear and slowing down the engine speed (rpm).
Select The Tractor’s Size As Per The Task
The fourth method is about the tractor’s size, which you should select as per tasks. So, if you want the best fuel-efficient tractor, you should use the lightest and smallest tractor for light loads and tasks. And if you do more horsepower operation, then go with the largest tractor to prevent overloading mini tractors, which enhance fuel consumption. Hence, select a tractor according to your farm size and tasks to avoid extra fuel consumption.
Optimize Efficiency With Effective Travel Patterns
The fifth method is about effective travel patterns. The proper travel patterns also help to improve the tractor’s fuel efficiency. As every minute spent road travels, opening gates and turning to provide high fuel consumption and less production. So, layout fields to reduce turning and overlapping tillage applications. Also, you can plan on-road travel efficiently and install cattle guards to reduce the time spent opening gates.
Choose Quality Products
The sixth method is about the quality products used in tractors. As per this method, choose quality products such as quality oils, fuel and lubricants, which help to enhance fuel efficiency and also extend engine life. You can use the best quality engine oils, gear lubricants, greases, and hydraulic fluids available in the tractor market. Use these specifically formulated products in tractors, reducing extra fuel consumption.
Use The Economic Power Take-Off
The seventh method is about the power-take-off. PTO is a vital feature of any tractor as it helps to attach other essential farm equipment and raise them. This feature is available in all the tractors available in the market. 540 rpm power take-off achieved using 20-25% lower engine speed than in full power mode. If you lower the engine speed, the economic power take-off will still deliver the same power but use 15-20% less fuel. Hence, by using economic power take-off, the tractors use less fuel and remain fuel-efficient.
These are some essential methods that help you increase your tractor’s fuel efficiency and reduce fuel consumption. By following these methods, you can make your tractor long-lasting without any extra effort. We hope you enjoy the blog and are happy with it. For more such blogs and topics, stay tuned with us.
Or, if you are searching for a John Deere tractor price list, visit TractorGuru.
